ASCO SCE210 24/DC - Brass, G3/4, NC, CR, Series 210 Pilot Operated Floating Diaphragm
ASCO series 210 two way shut off valves for automatic control of air, inert gas, water, oil and other gases/liquids compatible with the seal materials used. All valves require a minimum of 0.35 bar. All NO products are covered by Pressure Equipment Directive 97/23/EC and are suitable for group 1 and 2 fluids. The solenoid valves satisfy all relevent EC directives.
Series 210 - ASCO Pilot Operated Floating Diaphragm G3-8-G2
| Voltage | 24/DC |
| Manufacturer | ASCO |
| Function | 2/2 NC |
| Orifice Size (DN) | 19mm |
| Pipe Size | G3/4 |
| Body | Brass |
| Seal Material | CR |
| Media | Air, Gas, Water, Oil |
| Flow Coefficient KV (m3/h) | 5.6 |
| Flow Coefficient KV (l/min) | 93 |
| Weight (kg) | 1.4 |
NUMATICS P493- 100mm Bore, Centre Trunnion, MT4, Cast Iron, Series 493 Standardised Mountings
ASCO series 493 standardised mountings for series 450 cylinders conforms to ISO 15552 and ISO 21287 standards. All mountings can be used in explosives atmospheres, zones 1-21 and 2-22.
| Manufacturer | Numatics |
| Bore | 100mm |
| Weight (kg) | 1.52 |
ASCO SCG256 - G1/8, NC, DN1.2, Stainless Steel Body, Series 256 Direct Operated Solenoid Valves
ASCO product SCG256 has a wide range of ow and pressure ratings. Quick disassembly of core tube for easy maintenance of internal parts. Standard disc seal made of FPM suitable for a wide range of operating temperatures and compatible with many uids. Standard manual operator allows an easy installation (Except 4 and 5 mm orice sizes). AC/DC interchangeability of the solenoid without disassembly of the valve. Compliance with UL and CSA standards (coil 4/5,5 W). Compact and low weight valve. The solenoid valves satisfy all relevant EC directives.
| Body | Stainless Steel |
| Function | 2/2 NC |
| Pipe Size | G1/8 |
| Flow Coefficient KV (l/min) | 0.8 |
| Flow Coefficient KV (m3/h) | 0.05 |
| Orifice Size (DN) | 1.2mm |
| Operating Pressure Differential (BAR) | 0-20 |
| Media | Air, Liquids |
| Power Coil AC (W) | 4 |
| Power Coil DC (W) | 5.5 |
| Manufacturer | ASCO |
| Weight (kg) | 0.25 |
ASCO SCG256- G1/8, NC, DN1.2, Brass Body, Series 256 Direct Operated Solenoid Valves
ASCO product SCG 256 has a wide range of ow and pressure ratings. Quick disassembly of core tube for easy maintenance of internal parts. Standard disc seal made of FPM suitable for a wide range of operating temperatures and compatible with many uids. Standard manual operator allows an easy installation (Except 4 and 5 mm orice sizes). AC/DC interchangeability of the solenoid without disassembly of the valve. Compliance with UL and CSA standards (coil 4/5,5 W). Compact and low weight valve. The solenoid valves satisfy all relevant EC directives.
| Body | Brass |
| Function | 2/2 NC |
| Pipe Size | G1/8 |
| Flow Coefficient KV (l/min) | 0.8 |
| Flow Coefficient KV (m3/h) | 0.05 |
| Orifice Size (DN) | 1.2mm |
| Operating Pressure Differential (BAR) | 0-20 |
| Media | Air, Liquids |
| Power Coil AC (W) | 4 |
| Power Coil DC (W) | 5.5 |
| Manufacturer | ASCO |
| Weight (kg) | 0.25 |
ASCO E390- 3/2 NC, G1/2, Bronze Body, PTFE Seal, Entry Under Disc, Series E390 - ASCO Pressure Operated Piston Valves
ASCO series E390 pressure operated valves with bronze bodies and threaded ports features remote controlled capability and a anti-waterhammer design. Has a vacuum of up to 10 bar, also has a wide range of piston operators (63-90-125mm) rotatable through 360 degrees for maximum performance at different pilot pressures. The valves satisfy Pressure Equipment Directive 97/23/EC, article 3.3.
| Manufacturer | ASCO |
| Function | 3/2 NC |
| Body | Bronze |
| Seal Material | PTFE |
| Pipe Size | G1/2 |
| Flow Coefficient KV (m3/h) | 6 |
| Flow Coefficient KV (l/min) | 100 |
| Pilot Pressure (Bar) | 3-10 |
| Operating Pressure Differential (BAR) Air | 0-16 |
| Operating Pressure Differential (BAR) Liquids | 0-16 |
| Operating Pressure Differential (BAR) Steam | 0-10 |
| Operator Diameter (mm) | 63 |
| Media | Air, Gas, Water, Steam, Oil |
| Weight (kg) | 1.6 |
ASCO 346 - Panel Mounted In Line" Flow Regulator"
ASCO product 346 is a panel mounted in line” flow regulator. Operating pressure 1-10 bar”
| Media | Air, Gas |
| Seal Material | NBR |
| Body Material | Aluminium |
| Pipe Size | G1/8 |
| Manufacturer | ASCO |
| Accessory Type | In-Line Panel Mounted Flow Regulators |
| Weight (kg) | 0.06 |
ASCO 34600107 - G1/8 Brass Exhaust Regulator
ASCO product 346 is an exhaust regulator with an operating pressure 0-30bar and temperature -10 to 80DegC.
| Manufacturer | Joucomatic |
| Pipe Size | G1/8 |
| Accessory Type | Exhaust Silencer |
| Weight (kg) | 0.05 |
ASCO - Series 346 Quick Exhaust Valve, G1/4
ASCO product 346 is a quick exhaust valve with a light alloy body. Suitable for temperatures between -10C and +60C.
| Media | Air, Gas |
| Body Material | Light Alloy |
| Pipe Size | G1/4 |
| Manufacturer | Joucomatic |
| Orifice Size (DN) | 12mm |
| Accessory Type | Quick Exhaust Valve |
| Weight (kg) | 0.185 |
ASCO SCG238- G3/8, NC, Series 238 Pilot Operated Solenoid Valves
ASCO product SCG 238 is a two way shut-off valve for the control of cold and hot water. The zero bar, minimum operating pressure valves are designed to reduce waterhammer. Self-cleaning device located in the bleed orice to guarantee an optimal performance. The solenoid valves satisfy all relevant EC directives.
| Voltage | 24/DC, 115/50, 230/50, 24/50 |
| Body | Brass |
| Function | 2/2 NC |
| Pipe Size | G3/8 |
| Flow Coefficient KV (l/min) | 35 |
| Flow Coefficient KV (m3/h) | 2.1 |
| Orifice Size (DN) | 12.5mm |
| Media | Water |
| Operating Pressure Differential (BAR) | 0-10 |
| Power Coil AC (W) | 6 |
| Power Coil DC (W) | 15.3 |
| Manufacturer | ASCO |
| Weight (kg) | 0.55 |
ASCO 346 - Banjo Flow Regulator C (Adaptable on Cylinder) G1/4
ASCO product 346 is a banjo flow regulator (adaptable on cylinder). Banjo connection for direct fitting to cylinder port for simple, compact installation. Version (B) with a recessed adjustment screw is an even more compact design.. It offers the additional advantage of preventing inadvertent loss of flow
adjustment. Can be locked with a spot of varnish.
adjustment. Can be locked with a spot of varnish.
| Media | Air, Gas |
| Seal Material | NBR |
| Body Material | Metal |
| Pipe Size | G1/4 |
| Manufacturer | ASCO |
| Accessory Type | Banjo Flow Regulator |
| Weight (kg) | 0.107 |
ASCO 346 - Banjo Flow Regulator A (Adaptable on Cylinder) 4mm ext
ASCO product 346 is a banjo flow regulator (adaptable on cylinder). Banjo connection for direct fitting to cylinder port for simple, compact installation. Version (B) with a recessed adjustment screw is an even more compact design.. It offers the additional advantage of preventing inadvertent loss of flow
adjustment. Can be locked with a spot of varnish.
adjustment. Can be locked with a spot of varnish.
Series 346 ASC
| Media | Air, Gas |
| Seal Material | NBR |
| Body Material | Polymer |
| Pipe Size | G1/8 |
| Manufacturer | ASCO |
| Accessory Type | Banjo Flow Regulator |
| Weight (kg) | 0.021 |
ASCO 346 G1 1/4 Exhaust Silencer Filters
ASCO Joucomatic product 346 is an exhaust silencer filter with an operating pressure of 0-16bar. Temperature of -5 to 50DegC and maximum differential pressure of 0.5bar.
| Manufacturer | Joucomatic |
| Pipe Size | G1 1/4 |
| Accessory Type | Exhaust Silencer Filter |
| Weight (kg) | 1.12 |
ASCO 346 - Series 346 Non Return Valve, G1/8
ASCO product 346 is a non-return valve with a metal body. Suitable for temperatures between -10C and +60C.
| Media | Air, Gas |
| Body Material | Metal |
| Pipe Size | G1/8 |
| Manufacturer | Joucomatic |
| Flow at 6 bar (l/min) | 920 |
| Accessory Type | Non-Return Valve |
| Weight (kg) | 0.025 |
ASCO E290 2/2 NO, G1, Operator Diameter 50mm, Entry Under Disc, Series E290 Pressure Operated Compact Piston Valves
ASCO series E290 pressure operated compact valves for neutral fluids can be remote controlled. Features a high flow rate due to angle seat design. The valves are equipped with piston-type operators, has a anti-waterhammer design (fluid entry under the disc). Operator is rotatable through 360, the valves satisfy Pressure Equipment Directive 97/23/EC Article 3.3.
| Manufacturer | ASCO |
| Body | Bronze |
| Seal Material | NBR |
| Function | 2/2 NO |
| Pipe Size | G1 |
| Orifice Size (DN) | 25mm |
| Flow Coefficient KV (m3/h) | 12.8 |
| Flow Coefficient KV (l/min) | 213 |
| Operating Pressure Differential (BAR) | 0-10 |
| Media | Air, Gas, Water, Oil |
| Pilot Pressure (Bar) | 3-10 |
| Operator Diameter (mm) | 50 |
ASCO - G3/4, Orifice Size 15mm, Fluid Entry Under Disc, Series E290 Motorised Pressure Operated Valves
ASCO series E290 motorised pressure operated valves have a high flow rate due to the angle seat and anti-waterhammer design (fluid entry under the disc). The actuator is rotatable 360, LED valves display the current status of the valve. The valves satisfy Pressure Equipment Directive 97/23/EC, article 3.3.
| Manufacturer | ASCO |
| Body | Stainless Steel |
| Seal Material | NBR |
| Pipe Size | G3/4 |
| Orifice Size (DN) | 20mm |
| Flow Coefficient KV (m3/h) | 6 |
| Flow Coefficient KV (l/min) | 100 |
| Operating Pressure Differential (BAR) | 0-4 |
| Media | Air, Water, Oil |
| Operator Diameter (mm) | 67 |
| Weight (kg) | 0.65 |
ASCO - Orifice size 65-80mm, Mode A, Cast Iron Body, ASCO series 218 - Air/Oil Exchanger Installed On Valve
ASCO series 218 air/oil exchanger, specially designed for type AD differential action valves, ensures smooth and regular movement of the valve plunger to avoid waterhammer effect in certain applications. Series 218 can be supplied pre-installed or separately for fitting on-site to any valve in service.
| Manufacturer | ASCO |
| Body | Cast Iron |
| Orifice Size (DN) | 65mm, 80mm |
| Media | Air |
NUMATICS G438 - 32mm Bore, 25mm Stroke, G1/8, Single Acting Rod In, Series G438 Round Cylinders ISO 6431
ASCO series G438 round cylinders ISO6431 is easy to install with a threaded front cover and trunnion rear end. Features a compact mount for direct attachment of front or rear covers on machine. The double acting cylinders can come with or without pneumatic cushioning.
| Manufacturer | Numatics |
| Bore | 32mm |
| Stroke | 25mm |
| Body | Aluminium |
| Pipe Size | G1/8 |
NUMATICS 342 - Series 342, G1/2, Full 316L SS Filter / Regulator with 316L SS Pressure Gauge
ASCO Series 342 Stainless Steel Filter / Regulators are intended for use in potentially explosive atmospheres caused by gases, vapours, mists and / or dust according to ATEX Directive 94/9/EC.
These parts come with reinforced diaphragms, PTFE linings and a built-in overpressure relieving function.
These parts come with reinforced diaphragms, PTFE linings and a built-in overpressure relieving function.
ASCO Product Reference: 34208004
| Manufacturer | ASCO |
| Pipe Size | G1/2 |
| Description | Without Pressure Gauge |
| Type | 312 ST |
| Bowl Capacity (cm3) | 180 |
| Operating Pressure Differential (BAR) | 0.8-8 |
| Flow (ANR) at 6.3 BAR pressure (l/min) | 1500 |
| Air Service Equipment Type | Filter / Regulator |
| Filtering Capacity | 50um |
| Weight (kg) | 1.9 |
ASCO - Banjo Flow Regulator B (Adaptable on Cylinder) Plastic Body
ASCO product is a banjo flow regulator (adaptable on cylinder). Banjo connection for direct fitting to cylinder port for simple, compact installation. Version (B) with a recessed adjustment screw is an even more compact design.. It offers the additional advantage of preventing inadvertent loss of flow
adjustment. Can be locked with a spot of varnish.
adjustment. Can be locked with a spot of varnish.
| Media | Air, Gas |
| Seal Material | NBR |
| Body Material | Polymer |
| Pipe Size | M5 |
| Manufacturer | ASCO |
| Accessory Type | Banjo Flow Regulator |
| Weight (kg) | 0.007 |
NUMATICS - 32mm Bore, LFS Spare Parts Kit, Series G450 Tie Rod Cylinders ISO15552
ASCO series G450 cylinders with tie rods ISO15552 have a high performance self lubricating bearing and non-abrasive scraper seal. The tie rods are made from a hard anodized aluminium material, while the rod is encased in a hard chrome steel material which offers more protection and a longer service life. Air or inert gas, filtered, lubricated or not is highly recommended for these type of cylinders.
| Manufacturer | Numatics |
| Bore | 32mm |
NUMATICS - Series 342, G1/2, With 0-12 Bar Gauge & Semi Automatic Drain, Modulair 112, Combined Filter / Regulator
ASCO Numatics Series 342 is resistant to high temperatures, resistant to impact, UV light and even solvents. With a working pressure of up to 16 bar this is a very robust unit. The bowl is always locked in place during operation.
This material can be used in potentially explosive atmospheres (ATEX Directive 94/9/EC).
This material can be used in potentially explosive atmospheres (ATEX Directive 94/9/EC).
| Manufacturer | Numatics |
| Pipe Size | G1/2 |
| Description | Semi-automatic drain with pressure gauge |
| Modulair Type | 112 |
| Bowl Capacity (cm3) | 114 |
| Operating Pressure Differential (BAR) | 0.5-10 |
| Flow (ANR) at 6.3 BAR pressure (l/min) | 2500 |
| Air Service Equipment Type | Filter / Regulator |
| Weight (kg) | 0.83 |
ASCO SERIES 327 24/DC - G1/4, Universal, 5.7mm Orifice, Stainless Steel Body, Direct Operated Core Disc Solenoid Valve
ASCO Series 327 valves are recommended for pilot applications with basic flow, wide pressure ranges and no minimum operating pressure.
PTFE rider rings, and graphite filled PTFE seals reduce friction and eliminate sticking. Coils used in metal enclosures have class H insulation materials. Special execution for low power. Special execution for extreme low ambient temperatures.
PTFE rider rings, and graphite filled PTFE seals reduce friction and eliminate sticking. Coils used in metal enclosures have class H insulation materials. Special execution for low power. Special execution for extreme low ambient temperatures.
| Body | Stainless Steel |
| Function | 3/2 Universal |
| Pipe Size | G1/4 |
| Flow Coefficient KV (l/min) | 7.5 |
| Flow Coefficient KV (m3/h) | 0.45 |
| Orifice Size (DN) | 5.7mm |
| Operating Pressure Differential (BAR) | 0-10 |
| Manufacturer | ASCO |
| Operator Type | EF |
| Thread | NPT |
| Power Level | BP |
| Voltage | 24/DC |
| Weight (kg) | 0.95 |
ASCO 327 - G1/4, Universal, 5.7mm Orifice, Brass Body, Direct Operated Core Disc Solenoid Valve
ASCO Series 327 valves are recommended for pilot applications with basic flow, wide pressure ranges and no minimum operating pressure.
PTFE rider rings, and graphite filled PTFE seals reduce friction and eliminate sticking. Coils used in metal enclosures have class H insulation materials. Special execution for low power. Special execution for extreme low ambient temperatures.
PTFE rider rings, and graphite filled PTFE seals reduce friction and eliminate sticking. Coils used in metal enclosures have class H insulation materials. Special execution for low power. Special execution for extreme low ambient temperatures.
| Body | Brass |
| Function | 3/2 Universal |
| Pipe Size | G1/4 |
| Flow Coefficient KV (l/min) | 7.5 |
| Flow Coefficient KV (m3/h) | 0.45 |
| Orifice Size (DN) | 5.7mm |
| Operating Pressure Differential (BAR) | 0-10 |
| Manufacturer | ASCO |
| Operator Type | EF |
| Thread | NPT |
| Power Level | BP |
| Voltage | 24/DC, 230/50-60 |
NUMATICS G453 - 100mm Bore, 25mm Stroke, Through Rod, ATEX Zones 1/21, Series G453 Cylinders With Profiled Barrel
ASCO NUMATICS New 453 Series of cylinder is an easy mounting, sturdy cylinder with a new profiled barrel in hard anodised aluminium. These cylinders have a special design, specifically designed to easily cater for magnetic position indicators. The high performance, self-lubricating bearing and non-abrasive scraper seal ensure precise rod guidance. This product is available in bore sizes of 32mm, 40mm, 50mm, 63mm, 80mm and 100mm and comes in stroke sizes of between 25mm and 1000mm as standard (with custom stroke lengths available on request). We can have any cylinder from this range manufactured within 24 hours!
| Manufacturer | Numatics |
| Bore | 100mm |
| Stroke | 25mm |
| Body | Aluminium |
| Pipe Size | G1/2 |
| Weight (kg) | 3.7075 |
Numatics G453 - 100mm Bore, 160mm Stroke, Series 453 Non Cushioned Double Acting Cylinders
ASCO Numatics’ New 453 Series of cylinder is an easy mounting, sturdy cylinder with a new profiled barrel in hard anodised aluminium.
These cylinders have a special design, specifically designed to easily cater for magnetic position indicators.
The high performance, self-lubricating bearing and non-abrasive scraper seal ensure precise rod guidance.
This product is available in bore sizes of 32mm, 40mm, 50mm, 63mm, 80mm and 100mm and comes in stroke sizes of between 25mm and 1000mm as standard (with custom stroke lengths available on request).
We can have any cylinder from this range manufactured within 24 hours!
These cylinders have a special design, specifically designed to easily cater for magnetic position indicators.
The high performance, self-lubricating bearing and non-abrasive scraper seal ensure precise rod guidance.
This product is available in bore sizes of 32mm, 40mm, 50mm, 63mm, 80mm and 100mm and comes in stroke sizes of between 25mm and 1000mm as standard (with custom stroke lengths available on request).
We can have any cylinder from this range manufactured within 24 hours!
| Body | Aluminium |
| Bore | 100mm |
| Media | Air, Gas |
| Piston Rod Material | Stainless Steel |
| Stroke | 160mm |
| Manufacturer | Numatics |
| Description | Non Cushione |
NUMATICS G453 - 100mm Bore, 160mm Stroke, With Bellows, Through Rod, G1/2, Series G453 Cylinders With Profiled Barrel
ASCO NUMATICS New 453 Series of cylinder is an easy mounting, sturdy cylinder with a new profiled barrel in hard anodised aluminium. These cylinders have a special design, specifically designed to easily cater for magnetic position indicators. Cylinder equipped with protective bellow.
| Manufacturer | Numatics |
| Bore | 100mm |
| Stroke | 160mm |
| Body | Aluminium |
| Pipe Size | G1/2 |
ASCO SCG202 24/DC - G1/4, NC, DN3.2, Brass Body, Series 202 Posiflow Valves
ASCO product SCG202A003V is a variable flow valve, proportional to the control signal. Valves do not require a minimum operating pressure. Valves can be mounted in any position. The solenoid valves satisfy all relevant EC directives. Suitable for Air / Inert Gas
| Body | Brass |
| Function | 2/2 NC |
| Pipe Size | G1/4 |
| Flow Coefficient KV (l/min) | 4.0 |
| Flow Coefficient KV (m3/h) | 0.24 |
| Orifice Size (DN) | 3.2mm |
| Operating Pressure Differential (BAR) | 0-4 |
| Media | Air, Gas |
| Manufacturer | ASCO |
| Weight (kg) | 0.5 |
ASCO LG202 12/DC - 2/2 NC, G1/8, Brass Body, Series 202 - ASCO Preciflow IPC Proportional Solenoid Valve
ASCO series 202 proportional solenoid valve has a variable flow, proportional to the applied current. The valves dont require a minium operating pressure, 2/2 NC function, fluid entry under the disc. The solenoid valves satisfy all relevent EC Directives.
| Manufacturer | ASCO |
| Body | Brass |
| Flow Coefficient KV (m3/h) | 0.17 |
| Flow Coefficient KV (l/min) | 2.8 |
| Pipe Size | G1/8 |
| Orifice Size (DN) | 3mm |
| Power Coil DC (W) | 2.5 |
| Weight (kg) | 0.183 |
ASCO SCG225B008J - Stainless Steel, CR, 2/2 NC, G1/8, Series 225 Direct Operated Solenoid ValvesDirect Operated Solenoid Valves
ASCO Series 225 direct operated 2/2 NC solenoid valves don’t require a minimum operating pressure. Valve Operation is not affected by mounting position, internal parts are accessible for cleaning. The solenoid valves satisfy all relevent EC directives.
| Manufacturer | ASCO |
| Body | Stainless Steel |
| Seal Material | CR |
| Function | 2/2 NC |
| Pipe Size | G1/8 |
| Orifice Size (DN) | 3.2mm |
| Flow Coefficient KV (m3/h) | 0.20 |
| Flow Coefficient KV (l/min) | 3.3 |
| Operating Pressure Differential (BAR) | 0-8.5 |
| Media | Air, Water, Oil |
| Power Coil AC (W) | 6.3 |
| Power Coil DC (W) | 6.9 |
ASCO SCG225-24/DC - Brass, EPDM, 2/2 NC, G1/8, Series 225 Direct Operated Solenoid Valves
ASCO Series 225 direct operated 2/2 NC solenoid valves don’t require a minimum operating pressure. Valve Operation is not affected by mounting position, internal parts are accessible for cleaning. The solenoid valves satisfy all relevent EC directives.
| Voltage | 24/DC |
| Manufacturer | ASCO |
| Body | Brass |
| Seal Material | EPDM |
| Function | 2/2 NC |
| Pipe Size | G1/8 |
| Orifice Size (DN) | 2.4mm |
| Flow Coefficient KV (m3/h) | 0.15 |
| Flow Coefficient KV (l/min) | 2.5 |
| Operating Pressure Differential (BAR) | 0-12 |
| Media | Air, Water, Oil |
| Power Coil AC (W) | 6.3 |
| Power Coil DC (W) | 6.9 |
| Weight (kg) | 0.2 |
ASCO SCE210 - Brass, G2, NO, CR, Series 210 Pilot Operated Floating Diaphragm
ASCO series 210 two way shut off valves for automatic control of air, inert gas, water, oil and other gases/liquids compatible with the seal materials used. All valves require a minimum of 0.35 bar. All NO products are covered by Pressure Equipment Directive 97/23/EC and are suitable for group 1 and 2 fluids. The solenoid valves satisfy all relevent EC directives.
| Manufacturer | ASCO |
| Function | 2/2 NO |
| Orifice Size (DN) | 44mm |
| Pipe Size | G2 |
| Body | Brass |
| Seal Material | CR |
| Media | Air, Gas, Water, Oil |
| Flow Coefficient KV (m3/h) | 37 |
| Flow Coefficient KV (l/min) | 617 |
| Weight (kg) | 4.6 |
ASCO SCE210-103E - Brass, G2, NO, EPDM, Series 210 Pilot Operated Floating Diaphragm
ASCO series 210 two way shut off valves for automatic control of air, inert gas, water, oil and other gases/liquids compatible with the seal materials used. All valves require a minimum of 0.35 bar. All NO products are covered by Pressure Equipment Directive 97/23/EC and are suitable for group 1 and 2 fluids. The solenoid valves satisfy all relevent EC directives.
| Manufacturer | ASCO |
| Function | 2/2 NO |
| Orifice Size (DN) | 44mm |
| Pipe Size | G2 |
| Body | Brass |
| Seal Material | EPDM |
| Media | Air, Gas, Water, Oil |
| Flow Coefficient KV (m3/h) | 37 |
| Flow Coefficient KV (l/min) | 617 |
| Weight (kg) | 4.6 |
ASCO SCE210-103V - Brass, G2, NO, FPM, Series 210 Pilot Operated Floating Diaphragm
| Manufacturer | ASCO |
| Function | 2/2 NO |
| Orifice Size (DN) | 44mm |
| Pipe Size | G2 |
| Body | Brass |
| Seal Material | FPM |
| Media | Air, Gas, Water, Oil |
| Flow Coefficient KV (m3/h) | 37 |
| Flow Coefficient KV (l/min) | 617 |
| Weight (kg) | 4.6 |
